GoVideo vr2940 제품 매뉴얼
17
Initial Setup
After successfully connecting your DVD Recorder+VCR to your TV and other devices, you are
ready to complete the Initial Setup.
2 - Connections/Setup (cont.)
1
The Welcome screen is displayed. Press
ENTER to continue.
2
Use
/
to select the desired language
for the Initial Setup, then press
ENTER.
3
Use
/
to select your preferred language
for DVD Disc Menus, then press
ENTER.
4
Use
/
to select your preferred language
for DVD audio soundtracks, then press
ENTER.
• Choose “Default” to always select the
disc’s default audio language.
5
Use
/
to select your preferred language
for DVD subtitles, then press
ENTER.
• Choose “Default” to always select the
disc’s default subtitle language.
• Choose “Off” to always turn off subtitles.
6
Use
/
to select the type of signal you
are using to watch TV, then press
ENTER.
•
CATV - if using a Cable TV hookup
•
Antenna - if using an Antenna
•
Detect Automatically - if you are not
sure
7
Wait for the DVD Recorder+VCR to search
for available TV stations.
• This may take a few minutes to
• This may take a few minutes to
complete.
8
Set the clock.
• Use
• Use
/
to highlight each setting (hour,
minute, etc.).
• Use
/
to adjust each setting.
• When finished, press
ENTER.
9
An information screen appears introduc-
ing the YesDVD feature. Press
ENTER to
continue.
10
Initial Setup is complete!
• The DVD Recorder+VCR tunes to the
• The DVD Recorder+VCR tunes to the
lowest channel found.
Installation
Welcome.
Press [Enter] to begin auto channel search.
Ensure antenna is connected.
Instructions
Setup-Exit
Follow the Installation screens to set up
your DVD Recorder+VCR