GoVideo vr2940 제품 매뉴얼

20

•  Press the 

VCR button to set the remote 

control to operate the VCR deck.

•  Turn the TV on and select the video 

input source connected to the DVD 

Recorder+VCR.

•  Turn your audio system on and select 

the input source connected to the DVD 

Recorder+VCR.

  Insert a videotape in the VCR deck.

•  The DVD Recorder+VCR will power on 

automatically.

•  If a tape without a record safety tab is 

inserted, the DVD Recorder+VCR will 

start playback automatically.

  Press 

PLAY/PAUSE  .

  Press 



 to stop playback.

•  If the tape reaches the end before 



 is pressed, the DVD 

Recorder+VCR will automatically stop, 

rewind, and eject the tape.

The automatic tracking function adjusts the 

picture to remove snow or streaks. It works in 

the following cases:
•  When a tape is played for the first time.

•  When the tape speed (SP, SLP) changes.

•  When streaks or snow appear because of 

scratches on the tape.

If noise appears on the screen during playback, 

press the 

TRACKING +/- buttons on the 

remote control until the noise on the screen is 

reduced.

•  Press 



 or 



 during playback.

  to scan forward and backward at variable 

speeds. 

•  Press 

PLAY/PAUSE   during playback to 

pause the on-screen image.

•  If the picture vibrates, stabilize it by using 

the 

TRACKING +/- buttons.

•  Press 

SLOW+ for slow motion playback. 

•  Press 

SLOW+ and SLOW- repeatedly to 

adjust the slow motion playback speed.

•  Press 

CLEAR to reset the real-time counter 

to 0:00:00.

•  To automatically search for a specific tape 

counter position, use the Go-To Search 

function; see page 36.