GoVideo vr2940 제품 매뉴얼

38

SYMPTOM

CAUSE

SOLUTION

No power.

•  Power cord disconnected.

•  Plug power cord securely into wall 

outlet.

No picture.

•  TV not set to receive DVD 

Recorder+VCR signal output.

•  Video cable not connected securely.

•  TV power turned off.

•  Select appropriate video input on  TV 

so picture from DVD Recorder+VCR 

appears on TV screen.

•  Connect video cable securely.

•  Turn on TV.

No sound.

•  Equipment connected with audio cable 

not set to receive DVD Recorder+VCR 

signal output.

•  Audio cables not securely connected.

•  Power on equipment connected with  

audio cable turned off.

•  Audio cables damaged.

•  Select correct input mode on audio 

receiver to hear sound from DVD 

Recorder+VCR.

•  Connect audio cables securely.

•  Turn on equipment connected with  

audio cable.

•  Replace with new ones.

Poor playback picture.

•  Disc is dirty.

•  Tape heads are dirty.

•  Tape is a rental or was recorded on 

another VCR.

•  Clean disc.

•  Clean video heads.

•  Use 

TRACKING+/- for manual  

adjustment while tape is playing.

Playback does not 

start.

•  No disc inserted.

•  No tape inserted.

•  Unplayable disc inserted.

•  Disc placed upside down.

•  Disc not placed within guide.

•  Disc is dirty.

•  Parental Control level set.

•  Insert disc or tape (check that disc 

indicator on front panel display is lit.)

•  Insert playable disc (check disc type, 

color system, and regional code.)

•  Place disc with playback side down.

•  Place disc on disc tray correctly inside 

the guide.

•  Clean disc.

•  Cancel Parental Control function or 

change rating level.

Picture from external 

input distorted.

•  Video signal from external component 

is copy-protected.

•  Cannot connect component via 

the DVD Recorder+VCR. Connect 

component directly to your TV.

Some channels  

skipped when using 

CH



 .

•  Skipped channels were deleted with  

Add/Remove Channels feature.

•  Use Add/Remove Channels to restore 

channels; see page 31.

Picture/sound from 

broadcasting channel 

weak or missing.

•  Antenna or cables are loose.

•  Wrong signal type selected in DVD 

Recorder+VCR Setup menu.

•  Tighten connections or replace cable.

•  Try all signal type options (TV/CATV); 

see page 30.

Camcorder image not 

shown.

•  Camcorder is off.

•  Turn camcorder on and operate 

properly.

Camcorder image 

via A/V input to DVD 

Recorder+VCR not 

shown on TV screen.

•  DVD Recorder+VCR’s source not set 

to LINE1/LINE2.

•  Press INPUT to select AV input 

channel (LINE1/LINE2).