Bosch HES7052U 사용자 가이드

Operation - Cooktop

English 17

To turn on all three elements, Push in and turn the control knob to the 

 icon. 

Turn knob left or right to set the heat level.

The bridge element connects two single elements to create one long cooking sur-
face.

Depending on the model, the bridge element is either activated in conjunction with 

the front single element ( ) or the rear single element (

).  Refer to the control 

knob on your appliance to determine your configuration.

Turn ON the bridge element and the small element together
1. Push in on the control knob and turn clockwise to the desired heat setting. 

Tip: To complete the connection and create an even longer cooking surface , 
turn ON the other single element, too. 

To use the single element without bridge
1. Turn the knob counterclockwise.

Two or more surface elements are automatically disabled during Self-Clean 
Operation only. This is normal. Once the Self-Clean cycle is complete and the 
oven has cooled, the elements become operable once again.

Front Single Element

Element Location

Bridge Element with 
Front Single Element

Rear Single Element

Element Location

Bridge Element with 
Rear Single Element

Bridge element activated with

Bridge element activated with

front single element:

rear single element:

To avoid risk of personal injury, do not operate the cook top and 
ensure that all surface controls are turned off while the self clean 
cycle is operating.