DataCard SD260 사용자 가이드
109
Image Placement
• Important images can include the photo, logo, and bar code.
• Do not place an important image on the front of the card in the same area as a
• Do not place an important image on the front of the card in the same area as a
magnetic stripe or other machine-readable feature. Frequent use of a card in a
reader can wear away the image on the opposite side of the card.
reader can wear away the image on the opposite side of the card.
• Do not place an important image directly on the other side of a signature
panel. Residue from the panel can cause printing problems on an adjacent
card. Place the image above, below, or to the side of the panel.
card. Place the image above, below, or to the side of the panel.
• Avoid uneven areas that can result in inconsistent print quality.
• Do not place an important image directly on the other side of a smart card
• Do not place an important image directly on the other side of a smart card
chip. The card might not be as flat in that area and printing voids can occur.
Badges
If cards are used as badges, you
might want to punch a hole or
slot after printing so cards can be
attached to clips. The illustration
shows the maximum size for a
slot. A smaller slot will be
stronger and contribute to
durability in the slotted area.
might want to punch a hole or
slot after printing so cards can be
attached to clips. The illustration
shows the maximum size for a
slot. A smaller slot will be
stronger and contribute to
durability in the slotted area.