DataCard 285 사용자 가이드
2-16
Getting started
User’s Guide for the Magna™ Class Printer
Figure 2-15: Load new print ribbon on the ribbon cartridge
♦
Replace the print ribbon cartridge
1
Place the ribbon cartridge onto the ribbon cartridge supports, and
press down until it clicks into place (see
press down until it clicks into place (see
Figure 2-16
).
Figure 2-16: Replace the print ribbon cartridge
2
Close the swing arm, pressing it down until the push latch clicks
into place.
into place.
3
To close the cover, lift the top slightly. Move the support up so it is
parallel with the hinges, and lower the cover.
parallel with the hinges, and lower the cover.
4
If you are installing the print ribbon for the first time be sure to
print a printer test card after installing the printer driver. (See
print a printer test card after installing the printer driver. (See
for more
information.)
Ribbon take-up
Ribbon supply
Ribbon take-up
Print ribbon supply
MagnaUserGuide.book Page 16 Friday, May 5, 2000 1:09 PM