Optima g200 사용자 가이드

Please be careful, as there are several types of cables for
connecting a digital electronic device (e.g. MD player) to the
digital audio-out connector, depending on the connector type. The
connector on your computer is a Optical Mini \ Plug (3.5mm
diameter mini plug)

The headphone jack allows you to connect headphones or powered external speakers
to your notebook PC. Your headphones or speakers must be equipped with a 1/8" (3.5
mm) stereo mini-plug. In order to connect headphones or speakers follow these easy
steps:

1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.

If you plug headphones into the headphone jack, you will disable
the built-in stereo speakers.

The external monitor port allows you to connect an external monitor. In order to con-
nect an external monitor follow these easy steps:

1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.
3. Tighten the two hold-down screws, located on each end of the connector.

Pressing the [FN] + [F10] keys allows you to change your
selection of where to send your display video. Each time you
press the key combination, you will step to the next choice,
starting with the built-in display panel only, moving to the external
monitor only, finally moving to both the built-in display panel and
an external monitor.

Is there a stereo line-in jack? If not, remove from above.