Cambridge SoundWorks dtt2500 사용자 가이드
5
14
The rear satellites may be installed on
their convenient floor stands. While
listening, the stands should be positioned
to the left and right of your listening
position (see Diagram G on the
previous page).
listening, the stands should be positioned
to the left and right of your listening
position (see Diagram G on the
previous page).
The Floor Stands are small enough
to be stowed underneath a desk when
not in use. See page 7 for floor stand
assembly instructions.
not in use. See page 7 for floor stand
assembly instructions.
Larger work surfaces can accommo-
date both front and surround pairs of
satellites on their Desktop Stands. Try
the extreme corners of a desk using the
Desktop Stands (see Diagram H).
satellites on their Desktop Stands. Try
the extreme corners of a desk using the
Desktop Stands (see Diagram H).
Also, you may attach the rear
satellites under a desktop or at the
sides of a desk using the hook and
loop fasteners (see Diagram I).
sides of a desk using the hook and
loop fasteners (see Diagram I).
After you have positioned the rear
satellites, use the test sound to make
sure each speaker can be heard
clearly.
sure each speaker can be heard
clearly.
The Subwoofer. The subwoofer’s
optimum position is on the floor
against the wall under the computer
desk. The nearer the subwoofer is to
the corner of the room, the stronger
its maximum bass output will be. We
strongly recommend placing the
against the wall under the computer
desk. The nearer the subwoofer is to
the corner of the room, the stronger
its maximum bass output will be. We
strongly recommend placing the
subwoofer on the floor (see Diagram J).
Leave at least 8 cm (3 inches) of
space between the subwoofer face
and a wall. Small objects in front of,
but not touching the subwoofer (table
legs, for instance) will have no effect
on its sound. If you have no
available floor space, the subwoofer
can be placed on a shelf, desktop or
other sites, but its maximum output
will be reduced. The subwoofer is not
magnetically shielded, so position it
at least 18 inches away from a
computer monitor.
and a wall. Small objects in front of,
but not touching the subwoofer (table
legs, for instance) will have no effect
on its sound. If you have no
available floor space, the subwoofer
can be placed on a shelf, desktop or
other sites, but its maximum output
will be reduced. The subwoofer is not
magnetically shielded, so position it
at least 18 inches away from a
computer monitor.
H
I
J
Substituting a powered
subwoofer. You may substitute a
powered subwoofer for the subwoofer
that comes with the DTT2500 Digital.
Connect its line level input (typically
an RCA jack) to the dedicated
subwoofer output on the back of the
Decoder Amplifier, using a shielded
audio cable with RCA plugs on each
end. Refer to the powered
subwoofer’s User Manual for
adjustment procedures.
powered subwoofer for the subwoofer
that comes with the DTT2500 Digital.
Connect its line level input (typically
an RCA jack) to the dedicated
subwoofer output on the back of the
Decoder Amplifier, using a shielded
audio cable with RCA plugs on each
end. Refer to the powered
subwoofer’s User Manual for
adjustment procedures.
Using DVD player on TV
1. Connect Video Out of the DVD
player to Video Input of your
television.
2. Connect Dolby Digital com-
pressed signal output from your
DVD player to the DOLBY
DIGITAL (AC-3) SPDIF IN of
your DTT2500 Digital decoder
amplifier unit.
3. Press the CMSS button until all
its three LEDs are off to disable
the Creative Multi Speaker
Surround (CMSS) function.
1. Connect Video Out of the DVD
player to Video Input of your
television.
2. Connect Dolby Digital com-
pressed signal output from your
DVD player to the DOLBY
DIGITAL (AC-3) SPDIF IN of
your DTT2500 Digital decoder
amplifier unit.
3. Press the CMSS button until all
its three LEDs are off to disable
the Creative Multi Speaker
Surround (CMSS) function.
For movies with Dolby
Digital 5.1 (AC-3)
soundtracks:
This signal is detected auto-
matically and the DOLBY
DIGITAL LED lights up. You
will experience Dolby Digital
5.1 channel output.
Digital 5.1 (AC-3)
soundtracks:
This signal is detected auto-
matically and the DOLBY
DIGITAL LED lights up. You
will experience Dolby Digital
5.1 channel output.
For two-channel DVD
movies which are Dolby
Surround-encoded:
The Dolby Pro Logic decoder
will automatically decode the
program for 5.1 channel movie
experience.
movies which are Dolby
Surround-encoded:
The Dolby Pro Logic decoder
will automatically decode the
program for 5.1 channel movie
experience.
Applications Guide
Playing DVD Movies:
Using PC-DVD player on PC
1. Disable the ‘Creative Multi
Speaker Surround’ (CMSS)
function by pressing the CMSS
button until all four LEDs are
off.
1. Disable the ‘Creative Multi
Speaker Surround’ (CMSS)
function by pressing the CMSS
button until all four LEDs are
off.
For movies with Dolby
Digital 5.1 (AC-3)
soundtracks:
This signal is detected auto-
matically and the DOLBY
DIGITAL LED lights up. You
will experience Dolby Digital
5.1 channel output.
Digital 5.1 (AC-3)
soundtracks:
This signal is detected auto-
matically and the DOLBY
DIGITAL LED lights up. You
will experience Dolby Digital
5.1 channel output.
For two-channel movies
which are Dolby Surround-
encoded carried within the
Dolby Digital compressed
bitstream:
The Dolby Pro Logic decoder
will automatically decode the
program for 5.1 channel movie
experience.
which are Dolby Surround-
encoded carried within the
Dolby Digital compressed
bitstream:
The Dolby Pro Logic decoder
will automatically decode the
program for 5.1 channel movie
experience.
Connection Guide for DeskTop Theatre 5.1 DTT2500 Digital with Sound Blaster Live! and Creative PC-DVD system.
LINE IN
MIC IN
LINE OUT
REAR OUT
AUX_IN
Digital
Audio
Audio
Analog
Audio
DOLBY DIGITAL
(AC-3) SPDIF IN
(AC-3) SPDIF IN
SPEAKER OUTPUTS
LINE IN REAR IN
C SUBWOOFER RS
LS
R
L
15V
DC IN
DIGITAL
DIN
ANALOG AUTO
INPUT
PC-DVD ROM Drive
4-Channel Sound Card
(e.g. Sound Blaster Live!)
MPC-to-MPC CD-Audio Cable
Dolby Digital (AC-3)
SPDIF Out
SPDIF Out
Encore Dxr2 / PC-DVD MPEG2
Decoder Card (Luxsonar)
AUDIO_OUT
CD_IN