PROLINK Easy Install 10800058 사용자 설명서

제품 코드
10800058
다운로드
페이지 6
64 -
64
65
WhAt EASy INStALL CAN dO FOR yOu
Easy Install plug and play RF remote control Plug and play Radio Frequency (868.3 Mhz) remote control. Supplied with 
a five-channel hand-held transmitter, a plug and play receiver unit and a five-metre long, white cable as standard. The five-
channel hand-held transmitter enables the operation of five projection screens using one remote control. Available with 
European, UK or Swiss plug.
10800055 (EU)   10800066 (UK)   10800067 (CH)
accEssorIEs for control
Easy Install wireless projector coupling Projector Interface unit for projectors with a 12 volt DC/ 85 mA signal. The 
transmitter, which is battery powered, functions in combination with the Easy Install plug and play RF remote control (868.3 
Mhz). The transmitter is programmed via the RF receiver.
10800056
Easy Install RF remote control with wireless projector coupling
10800057 (combination of 10800055 + 10800056) (EU)
10800070 (combination of 10800066 + 10800056) (UK)
10800069 (combination of 10800067 + 10800056) (CH)
Easy Install projector coupling with cable Plug and play Projector Interface, 230 Volt; 50 Hz for video projectors with a 
12 V DC/ 85 mA signal. Equipped with a manual override switch on the trigger case. Supplied with a five-metre long, white 
cable as standard. Available with European, UK or Swiss plug.
10800059 (EU)   10800074 (UK)   10800075 (CH)
Easy Install plug and play IR remote control Plug and play infrared remote control 230 Volt/ 50 Hz with one-channel 
hand-held transmitter, a plug and play receiver with an integrated infrared eye. Potential-free contacts are available in the IR 
remote control case. This allows a screen to be connected to an operating system or wall switch. Supplied with a five-metre 
long, white cable as standard. Available with European, UK or Swiss plug.
10800058 (EU)   10800072 (UK)   10800073 (CH)
Easy Install plug and play relay box with potential-free contacts This accessory makes it possible to connect screens to 
operating systems by using potential-free contacts. This relay box makes it fast and easy to integrate a projection screen into 
an entire system. The relay box is connected with constant voltage.
10800068 (EU)   10800084 (UK)   10800083 (CH)
Easy Install plug and play RS232/RS422 control kit As an extension to the relay box with potential-free contacts, Projecta 
also offers the possibility of operating projection screens via RS232/RS422 serial protocol. This makes the projection screen 
even easier to integrate into an operating system. A distance of 44 metres can be covered by using a UTP CAT 5 cable. By 
using the RS422 protocol, you can even receive feedback concerning the extent to which the projection screen fabric has 
been extended.
10800080
Easy Install plug and play RS232/RS422 with IP control kit If 44 metres is still not enough, then Projecta’s solution is to 
operate the projection screen via the Internet Protocol (IP). All that is needed is a connection to the Internet.
10800085