Hitachi BZ-1 사용자 가이드

12

Setting up

•  If you insert a USB storage device, such as a USB memory, into the USB TYPE 

A port and select the port as the input source, you can view images stored in the 
device (

87).

•  You can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug. 

In that case, the built-in speaker outputs the sound from the microphone, even 
while the sound from the projector is output. You can input line level signal to the 
MIC port from equipment such as wireless microphone. Select HIGH in the MIC 
LEVEL item of the AUDIO menu when you input line level audio signal to the 
MIC port. In the normal mode, the volume of the microphone can be adjusted 
separately from the volume of the projector using the menu (

49).  

   In the standby mode, the volume of the microphone is adjustable with the 

VOLUME +/- buttons on the remote control, in synchronization with the volume 
of the projector (

22).   

   Even when the sound of projector is set to mute mode by the AUDIO SOURCE 

function (

48), the  volume of the microphone is adjustable.  

   In both modes (standby or normal), the MUTE button on the remote control 

works on the sounds of the microphone and the projector (

22).

• If a loud feedback noise is produced from the speaker, move the 

microphone away from the speaker. 
• This projector doesn't support plug-in power for the microphone.

NOTE

(continued on next page)

►Before removing the USB storage device from the port of the 

projector, be sure to use the REMOVE USB function on the thumbnail screen to 
secure your data (

90).

CAUTION