Hitachi ut37v702 사용자 가이드

9

SAFETY PRECAUTIONS (continued)

Main Unit Installation

Anti-tumble Measures

Install in a stable location and take safety precautions against overturning.

When installing the main unit, be sure to use the specified mounting units in order to obtain maximum performance 

and maintain safety.

Hitachi assumes no responsibility nor liability for personal injuries or property damage caused by use of other 

mounting units or improper installation.  

With respect to installation instructions, please read each user manual for the respective mounting units: for 

Tabletop Setup, Floor Stand Setup, Wall Mounting, and Ceiling Mounting.

If using Wall or Ceiling Mounting units, contact your local dealer and ask for an approved installation specialist to 

set up the unit. Never attempt to install it yourself. That could cause injury or damage.

Please leave adequate space around the unit in order 

to avoid increasing the internal temperature.

Make sure not to block any ventilation holes.

Do not install the unit in a small space such as inside 

a cabinet, closet or box without adequate ventilation.

Leave at least 10cm (4") of clearance from each side 

of the unit and 30cm (1') from the top of the unit to 

ceiling.

Securing to a table

Securing to ceiling or wall

Use the specified mounting unit to secure the set to a ceiling. For Wall Mounting setup please refer to page ( 

11

 ).

For Floor Stand setup please refer to page ( 

12

 ).

 For more information regarding mounting of the unit, please contact 

800-HITACHI.

 Please install the unit in a proper location where it does not expose anyone to the danger of bumping themselves 

(for example their hands, head or face, etc) against the edges of the unit and causing personal injury.

10cm (4”)

or more

10cm (4”)

or more

30cm (1’)

or more

10cm (4”)

or more

10cm (4”)

or more

Wood screw 

(4 x 20 screw) : 1 pc.

Plastic rivet

Fastening strap