Hitachi vt-ux6450a 사용자 설명서
CABLE BOX SETUP
- 37 -
CABLE BOX SETUP
Note: This setup should be performed if you receive all channels through a cable box.
(Hookups [E], [F] or [G]).
(Hookups [E], [F] or [G]).
The VCR can be programmed to:
• Automatically select channels on the cable box during a timer record or VCR Plus+ delayed recording operation.
• Change channels on remote controlled cable boxes with the VCR remote control.
• Automatically select channels on the cable box during a timer record or VCR Plus+ delayed recording operation.
• Change channels on remote controlled cable boxes with the VCR remote control.
BEFORE YOU BEGIN...
Make sure the cable box is positioned properly on the VCR.
Make sure the cable box is positioned properly on the VCR.
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
The main on-screen menu will appear on the TV screen.
MENU
1
2
3
REVIEW
SETUP
CLOCK
4
CHANNEL
—————————————————
7
ENGLISH
8
FRANÇAIS
END
GUIDE
3 Press the (4) button twice to select the CHANNEL PRESET operation.
CHANNEL PRESET
1
CATV1
2
AUTO
CH SOURCE CHANNEL SET
3
CH LIST
4
VCR PLUS+
ADD/ERASE SETUP
5
CABLE BOX
SETUP
END
GUIDE
4 Press the (1) button twice to select "CATV2".
CHANNEL PRESET