Canon dc330 지침 매뉴얼

34 • 

Video

When you press 

 the 

camcorder enters the 

 standby mode. 

In standby mode the camcorder 
consumes only about half the power 
used when recording, saving energy 
when you are using a battery pack. 
Additionally, when you press 

 again the camcorder is 

ready to start recording within approx. 
1 second*, ensuring you do not miss 
important shooting opportunities.

* The exact time required until the camcorder 

is ready to start recording may vary 
depending on the shooting conditions.

The standby lamp flashes at first 
while the camcorder is preparing and 
then stays on when it enters the 
standby mode.

Within approx. 1 second, the 
camcorder is ready to record.

• When you wake up the camcorder from 

standby mode, the following settings will 
be changed automatically:

- Manual focus returns to automatic 

focus (AF).

- Manual exposure adjustment returns to 

automatic exposure.

- Zoom position returns to full wide 

angle W.

• The camcorder will shut off if left in 

standby mode for 10 minutes, regardless 
of the [POWER SAVE] setting (

77). 

You can select the length of time until 
shut-off with the [

STANDBY OFF] 

setting (

77).

To restore the power if the camcorder 
shut off, turn the 

 switch toward 

MODE and release it, or turn the 
camcorder off and then on again.

• If you perform any of the following 

actions while in standby mode (while the 
standby lamp is on), the camcorder will 
be woken up from standby mode.
- Open the disc compartment cover.
- Change the position of the 

/

 

switch.

- Turn the 

 switch toward MODE.

Even in 

 mode you can play 

back the last scene recorded in order to 
check it. If you are using a DVD-RW 
disc, you can also delete the scene 
while reviewing it.

(

QUICK START

QUICK START

QUICK START

QUICK START

(

CO

PY