Canon dc330 지침 매뉴얼
52 •
Photos
Photos
Refer to this chapter for details on shooting photos – from capturing
and playing back images to printing them.
and playing back images to printing them.
Basic Recording
Taking Photos
1
Move the
/
switch to
(still
images).
2
Turn the
switch to ON to set
the camcorder in CAMERA mode.
The red CAMERA indicator will turn
on.
on.
3
Move the lens cover switch down
to
to
to open the lens cover.
4
Press .
• Once the focus is automatically
adjusted,
will turn green and one
or more AF frames will appear.
• The CARD access indicator will
flash as the still image is being
recorded.
recorded.
• When you press
on the
wireless controller, the still image is
recorded after the autofocus is
activated and locked.
recorded after the autofocus is
activated and locked.
IMPORTANT
Observe the following precautions while
the card access display (
the card access display (
) appears on
screen, and when the CARD access
indicator is on or flashing. Failing to do so
may result in permanent data loss.
- Do not subject the camcorder to
indicator is on or flashing. Failing to do so
may result in permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot cover
and do not remove the memory card.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the
/
switch or the operating mode.
NOTES
If the subject is not suitable for autofocus,
turns yellow. Adjust the focus manually
(
42).
Basic Recording
Before using a memory card for the
first time, be sure to initialize it with
this camcorder (
first time, be sure to initialize it with
this camcorder (
(
Start/Stop
PHOTO
CO
PY