Canon C50 사용자 설명서

Approval Number 607676

Your Canon MultiPASS C50 has been approved against the
requirements of NTR3 for use in the UK. The CE mark is applied in
respect of the requirements of 72/23 EEC and 89/336 EEC.

It is intended for connection to analogue two wire public
telecommunication networks.

Connect the supplied cable to this socket first, then to the telephone
line.

This socket is intended for connection of the Canon optional
telephone. If required, an adapter to connect any piece of approved
telecommunications apparatus is available from your Canon
supplier.

Canon recommend that any additional equipment connected in the
installation is connected to this telephone socket. Do not connect
additional equipment through parallel sockets elsewhere on the
telephone line.

Voltage and current available at these sockets is determined by the
network to which the line cable is connected. They will not normally
exceed the limits for TNV as described in EN60950.

Ringer Equivalence Number (REN) = 1

The REN is a guide to help calculate the maximum number of items of
apparatus that will ring when connected simultaneously to one phone
line. The total RENs of the individual items should not exceed 4. Correct
ringing may not always be possible even when total REN does not
exceed 4. The REN value of a BT telephone is assumed to be 1 unless
otherwise marked.

This equipment is not intended or recommended for making calls to
emergency services.