Canon B150 시작 가이드

❏ Cannot make a copy?

• Was the [HOOK] button pressed?

You cannot make copies if [HOOK] was pressed. Press [HOOK] to
release it.

• Make sure the handset is on the hook.
• Make sure a document is set in the Automatic Document Feeder (ADF)

and the LCD displays the current resolution.

• Print an activity report to ensure the fax is working properly.

❏ Multiple sheets feed into the fax?

• Make sure the paper is not sticking together. Fan the paper before load-

ing it into the paper tray. Always fan a stack of paper along the edge that
will feed into the fax first.

• Make sure the paper tray does not contain too much paper. Remove a

few sheets of paper from the paper tray.

• If different paper types are loaded in the paper tray, load just one paper

type. See Loading the paper, p. 7.

❏ Paper is loaded skewed (Printing is skewed)?

• Make sure the paper is loaded properly in the paper tray: the right side

of the paper is aligned against the right side of the paper tray and the
paper guide rests against the left side of the paper stack, see Loading
the paper, p. 7.

❏ Sending and receiving documents too slow?

Before sending documents, press [RESOLUTION MODE] until
STANDARD appears on the display. Sending will be faster, but the
image will not be as clear, and photos will be reproduced in black and
white only.

Because the fax is constantly checking for errors during transmission,
ECM sending and receiving require more time. If the transmission speed
appears to be extremely slow, you may be able to speed it up by turning
ECM off. See p. 85.