Canon B150 시작 가이드
84
OUTPUT YES/
OUTPUT NO/
PRINT ERROR ONLY
OUTPUT YES/
OUTPUT NO
OUTPUT YES/
OUTPUT NO/
PRINT ERROR ONLY
OUTPUT YES/
OUTPUT NO
ON/OFF
TX REPORT
TX CONFIRM REP.
RX REPORT
ACTIVITY REPORT
TX/RX SEPARATE
REPORT SETTINGS
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 81, 82.
Name
Description
Settings
Enable/disable automatic printing of the transmission report.
PRINT ERROR ONLY prints only when a transmission error
occurs.
OUTPUT YES sets the fax to print an activity report every
time you send a document.
OUTPUT NO turns off the activity report feature.
PRINT ERROR ONLY prints only when a transmission error
occurs.
OUTPUT YES sets the fax to print an activity report every
time you send a document.
OUTPUT NO turns off the activity report feature.
When you set TX REPORT to OUTPUT YES or PRINT ERROR
ONLY, you can add to the TX report half of the first page of
the document that was being sent. This can help remind you
which document was being sent. Valid only for memory
transmissions.
ONLY, you can add to the TX report half of the first page of
the document that was being sent. This can help remind you
which document was being sent. Valid only for memory
transmissions.
Enable/disable automatic printing of the reception report.
PRINT ERROR ONLY prints only when an error occurs during
receiving.
OUTPUT YES sets the fax to print an activity report every
time you receive a document.
OUTPUT NO turns off the activity report feature.
PRINT ERROR ONLY prints only when an error occurs during
receiving.
OUTPUT YES sets the fax to print an activity report every
time you receive a document.
OUTPUT NO turns off the activity report feature.
Enable/disable automatic printing of the activity report.
Unless you change the setting, your fax is set to print an
activity management report for every 20 transactions
(sending and receiving).
Unless you change the setting, your fax is set to print an
activity management report for every 20 transactions
(sending and receiving).
Divide the activity management report into sending and
receiving transactions.
receiving transactions.
TEL LINE TYPE*
PSTN/PBX SET
PSTN
PBX
M-KEY SETTING
(UK only)
(UK only)
ACCESS CODE
ID CODE
Set the dialling method the fax uses to match the type of
phone line you have.
phone line you have.
Sets the type of the PBX through which your fax is connected.
Your fax is connected to the outside line.
Your fax is connected through a PBX.
You can set the type of the PBX among PREFIX, HOOKING and
EARTH CONNECTION. If you select PREFIX, you can set the
number up to 19-digits that will access the outside line.
If set to PBX, the [05] button cannot be used for One-touch
Speed Dialling.
You can set the type of the PBX among PREFIX, HOOKING and
EARTH CONNECTION. If you select PREFIX, you can set the
number up to 19-digits that will access the outside line.
If set to PBX, the [05] button cannot be used for One-touch
Speed Dialling.
Enable/disable the M–key setting. When set to ON, the [10]
button cannot be used for One-touch Speed Dialling.
Set an access code and ID code for the 2300 service of
Mercury Communications Limited, p. 42.
button cannot be used for One-touch Speed Dialling.
Set an access code and ID code for the 2300 service of
Mercury Communications Limited, p. 42.
Set an access code up to 19 digits.
Set an ID code up to 19 digits.
TOUCH TONE/
ROTARY PULSE**
PSTN/PBX
ON/OFF
–
–
Name
Description
Settings
* TEL LINE TYPE cannot be set in HongKong, Norway and Denmark.
** TOUCH TONE is the default setting in the UK and Singapore.