Canon B155 사용자 설명서

Wait a second for the number to appear after the
name of the number.
❚ If no number is registered for the button or code

you pressed, the LCD display shows the NO TEL #
message. Make sure you pressed the correct button
or entered the correct code and that the number
you want to dial is registered correctly.

❚ If you make a mistake, press [Stop]. Then press the

correct One-touch Speed Dialling button or press
[Coded Dial] and re-enter the code.

❚ If an error message appears on the LCD, correct

the error and press [Stop]. If necessary, refer to
Frequently asked questions, p. 106.

❚ The fax beeps once to indicate that the document has been sent successfully.

TRANSMITTING OK

❚ If an error occurs during sending, the fax beeps intermittently for a few seconds. If

this happens, try sending the fax again.

❚ The fax automatically redials if the receiving fax does not answer or if the line is

busy. (You can specify the number of times it redials; see AUTO REDIAL in TX
SETTINGS, p. 87.)

❚ To stop sending before the fax is finished, press [Stop]. You may then need to lift

the operation panel to remove the document. See Clearing document jams, p. 62.

❚ If an error message appears on the LCD, correct the error and then press [Stop].

Refer to Error codes, messages and solutions, p. 112.

■ Sending a document using One-touch Speed Dialling or

After registering the One-touch numbers or Coded Speed Dialling numbers, you can
send documents as follows:

See Loading the document, p. 49.
You can set the resolution and the density, p. 51.

FINE

       

10

01

CANON FAX

12345678999

                               or

Coded Dial

✱

9

0

CANON FAX

12345678999