Canon BJC-1000 사용자 설명서
5-10
Troubleshooting
Chapter 5
Printing Halts
Cause
Solution
The print job may be a
Check the printer operation
finely detailed photograph The printer requires more time to process a finely
or illustration
or illustration
detailed illustration or photograph.
Printout Is Unsatisfactory
Printout faint or colors are wrong
Cause
Solution
Print head nozzles in the
Print a Nozzle Check Pattern
BJ cartridge are clogged
Check the status of the print heads (see page 4-5). Clean
or the ink has run out
the print head (see page 4-7). Replace the BJ cartridge
if necessary (see page 4-11).
if necessary (see page 4-11).
Protective cap or tape
Remove the protective cap and tape
have been reattached
Install the BJ cartridge again (see page 4-11) and clean
to the BJ cartridge
the print head (see page 4-7).
Not printing on correct
Reload the print media
side of the media
Make sure that you load the media with the correct print
side up.
side up.
The last part of print job is not printing
Cause
Solution
Paper used for printing
Specify the paper size you are using in the driver
differs from the paper
Page Size setting (on the Paper tab)
paper size specified in
If your software application allows you to specify the
the software application
paper size in the page setup, ensure that the Page Size
and printer driver
settings in the software application and the printer driver
are the same.
are the same.
Parallel cable not
Check the parallel cable
connected correctly
Make sure the parallel cable is securely fastened to the
computer and the printer. For details, see the Quick Start
Guide.
computer and the printer. For details, see the Quick Start
Guide.