Canon A95 사용자 설명서

다운로드
페이지 163
133
Appendix
Appendix
- When charging completes in a matter of a 
few minutes (the battery charger indicator 
remains lit)
z You may not be able to fully charge the 
batteries due to their specifications right after 
purchase or after long periods of non-use. If 
this happens, use the batteries until their 
charge is depleted before charging them 
again. After doing this several times, battery 
performance will be restored.
z Since storing fully charged batteries for long 
periods of time (about 1 year) can shorten 
their lifecycle or affect performance, you are 
recommended to use the batteries in the 
camera until they are completely discharged 
and to store them at normal temperature (23 
°C/73 °F) or less. If you do not use the 
batteries for long periods of time, charge 
them fully and discharge them fully in the 
camera at least once a year before returning 
them to storage.
z If battery usage time is considerably low 
despite their terminals being wiped and the 
battery charger's indicator remaining lit, it is 
possible that the batteries have reached the 
end of their lifespan. Switch to different, 
unused batteries. If you are purchasing new 
batteries, look for Canon’s AA-size NiMH 
batteries (four piece set).
z Leaving batteries in the camera or charger 
may damage it causing battery leakage. 
Remove batteries from the camera or 
charger and store in a dry cool location when 
not in use.
z It takes approximately 250 minutes for the 
charger to fully recharge the batteries (as 
determined by testing at Canon facilities). 
Please do not charge batteries in areas 
where the temperature is outside the 
range of 0 to 35°C (32 to 95°F).
z Charging time varies according to ambient 
temperature and to the batteries' initial 
charge state.
z The battery charger may emit noise while 
charging. This is not a malfunction.
z Battery/Charger Kit CBK100 can also be 
used. Use Canon AA-size batteries 
NB-1AH with the charger included in the 
CBK 100 kit.