Canon A95 사용자 설명서

다운로드
페이지 163
17
Preparing the Camera
Preparing t
he Camera, Basic Functions
WARNING
Never use damaged batteries or batteries 
whose outer seal is completely or partially 
missing or peeled off, as there is risk that such 
batteries may leak, overheat, or burst. Always 
check the seals on store-bought batteries 
before loading them, as some batteries may 
come with defective seals. Do not use batteries 
with defective seals. 
Never use batteries that look like this.
Batteries with all or part of the seal 
(electrical insulation sheath) peeled 
off.
The positive electrode (plus terminal) 
is flat.
The negative terminal is correctly 
formed (protruding from the metal 
base), but the seal does not extend 
up over the edge of the metal base.
Battery Status Indications
The LCD monitor displays an icon or message to 
let you know when batteries are low or depleted. 
Power lamp 
blinks green
Batteries are beginning to run low. 
Replace or recharge the batteries if 
you wish to continue using the 
camera. If the LCD monitor is off, 
this icon will appear when you 
press any of the following buttons: 
DISP.
,
 or 
MF button.
Change the 
batteries
Batteries are fully depleted and the 
camera can no longer operate. You 
should replace the batteries 
immediately.