Canon A95 사용자 설명서

35

Shooting – The Basics

The Basics

Pressing Halfway
Pressing halfway 
automatically sets the 
exposure and focus.

• Two beeps will sound when the camera has 

finished metering, and the upper indicator will 
light green or orange. If the LCD monitor is 
on, the AF frame will appear green.

• The lower indicator will blink yellow and the 

beep will sound one time if the subject is 
difficult to focus on.

7

Pressing Fully
Pressing fully releases 
the shutter.

• You will hear the shutter 

sound when the shot is 
complete. Do not move 
the camera until you 
hear this sound.

• The upper indicator blinks green while data is 

recorded onto the CF card.

• The picture appears for approximately two 

seconds on the LCD monitor, if it is on.

z See page 159 for settings that can be 

changed in this mode.

z With the Review function, you can 

change the length of time images show 
on the LCD monitor after shooting, or set 
it so they do not show at all (p. 37). 

z If the orange or yellow indicator blinks 

while you press halfway, you can still 
press fully to take the shot. 

z Images are first saved into the camera’s 

internal memory before being recorded 
onto the CF card, allowing the next 
images to be taken immediately as long 
as sufficient space is available in the 
internal memory.

z The beep and shutter sound can be set 

On/Off in the Set up menu (p. 71).

z Even when the shutter sound is set to 

[

, 

, 

 (On)] (p. 74), no sound will 

be heard if [Mute] is set to [On].

z There is no shutter sound in movie 

mode.

z Shots cannot be taken while the flash is 

charging.