Canon MF5550 부록 매뉴얼

 

Supply a suitable table, cabinet, or desk. For the machine's dimensions and weight, 
see Chapter 11, "Appendix," in the 

 

.

 

1. Provide only a single-line to touch-tone or rotary telephone set terminated with a 

standard 4-pin modular phone plug. (Touch-tone is recommended if available in 
your area.)

2. Order an RJ11-C modular jack (USOC code), which should be installed by the 

telephone company. If the RJ11-C jack is not present, installation cannot occur.

3. Order a normal business line from your telephone company's business 

representative. The line should be a regular voice grade line or equivalent. Use 
one line per machine.

DDD (DIRECT DISTANCE DIAL) LINE

-or-

IDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE 
OVERSEAS

NOTE

 

Canon recommends an individual line following industry standards [e.g., the 2,500 (touch 
tone) or 500 (rotary/pulse dial) telephones]. A dedicated extension off a PBX unit without 
"Camp On" signals is also permissible with your imageCLASS MF5550. Key telephone 
systems are not recommended because they send non-standard signals to individual 
telephones for ringing and special codes, which may cause a fax error.

 

The power outlet should be a three-prong grounded receptacle (Single or Duplex). 
It should be independent from copiers, heaters, air conditioners or any electric 
equipment that is thermostatically controlled. The rated value is 120 volts and 15 
amperes. The RJ11-C modular jack should be relatively close to the power outlet to 
facilitate installation.