Canon MF5550 부록 매뉴얼

Setting the Receive Mode

Receiving F

a

x

e

s

■ When You Receive a Voice Call

The answering machine will record any voice messages.

Adjust your answering machine as follows:

•

Set the answering machine to answer on the first or second ring.

•

The entire message should be no longer than 15 seconds.

•

In the message, tell your callers how to send a fax.

If you want to select <DRPD>, check the following:

■ Select This Mode If:

•

you only have one telephone line for both fax and telephone use.

•

you want to receive faxes automatically as well as voice calls.

•

you have subscribed to a DRPD (Distinctive Ring Pattern Detection) service with your 
telephone company. This service assigns two or more fax/telephone numbers with 
distinctive ring patterns to a single telephone line, allowing you to have both a fax 
number(s) and a telephone number(s) using only one telephone line. The machine will 
automatically monitor incoming calls and based on the ring pattern, will let you know if 
the call is a fax or voice call. Contact your telephone company for more information on 
this service.

■ You Will Need to:

•

set <DRPD>. (See "Setting the Receive Mode," on p. 5-1.)

•

connect a telephone to the machine. (See "Connect the telephone cable and any 
necessary external device," in the Set-Up Sheet.)

■ When You Receive a Fax Call

The telephone will ring according to the ring pattern you have chosen and the machine  
receives the fax automatically.

■ When You Receive a Voice Call

The telephone will ring according to the ring pattern you have chosen. Pick up the 
handset to answer the call.