Canon MF5550 부록 매뉴얼

 

Supply a suitable table, cabinet, or desk. For the machine's dimensions and weight, 
see Chapter 11, "Appendix," in the 

 

.

 

1. Only a single line, touch-tone or rotary telephone set is to be used.

2. Order an RJ11-C modular jack (USOC code), which should be installed by the 

telephone company. If the RJ11-C jack is not present, installation cannot occur.

3. Order a normal business line from your telephone company's business 

representative. The line should be a regular voice grade line or the equivalent. 
Use one line per machine.

DDD (DIRECT DISTANCE DIAL) LINE

-or-

IDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE 
OVERSEAS

NOTE

 

Canon recommends an individual line following industry standards, e.g., the 2,500 
(Touch Tone) or 500 (Rotary/Pulse Dial) telephones. A dedicated extension off a PBX 
unit without "Call Waiting" can be used with the imageCLASS MF5550. Key telephone 
systems are not recommended because they send non-standard signals to individual 
telephones for ringing and special codes, which may cause a fax error.

 

This equipment should be connected to a standard 120-volt AC, three-wire 
grounded outlet only. Do not connect this machine to an outlet or power line shared 
with other appliances that cause "electrical noise." Air conditioners, electric 
typewriters, copiers, and machines of this sort generate electrical noise which often 
interferes with communications equipment and the sending and receiving of 
documents.