Canon D320 설치 설명서

1 Load the paper stack in the cassette.

• Insert the paper stack into the cassette 

as far as it will go.

2 Slide the width guides 

A and the length

guide 

B to fit the size of the paper stack.

• Adjust the guides so that there is no space

between the guides and the paper.

• Make sure the paper stack does not exceed the

width and length guides’ claws.

3 Set the multi-purpose tray on top of the

cassette.

When the power cord is plugged into the machine and into the wall outlet, the
machine is turned on. There is no separate ON/OFF power switch. Once connected, the
machine needs to warm up before you can use it. The LCD displays PLEASE WAIT, then
INSTALL CARTRIDGE. The LCD returns to the standby display when you install the
cartridge and load paper in the cassette or multi-purpose tray.

• Insert the power cord straight into the power cord 

connector on the left side of the machine.
Do not insert it at an angle. Otherwise, the machine
may not be properly connected to the power source
and may not turn on. If this happens, disconnect the
power cord, and reconnect it correctly after a minute
or more.

• When disconnecting or connecting the power cord, be

sure to unplug or plug the power cord from the wall
outlet, not from the power cord connector on the
machine.