Canon MF5750 사용자 가이드

Setting the Receive Mode

Receiv

ing F

a

x

e

s

If you want to select <Manual>, check the following:

■ Select This Mode If:

•

you only have one telephone line for both fax and telephone use.

•

you receive mainly voice calls and sometimes faxes.

■ You Will Need to:

•

set <Manual>. (See “Setting the Receive Mode,” on p. 5-1.)

•

connect a telephone to the machine. (See “Connect the telephone cable and necessary 
external device,” in the Set-Up Instructions (for MF5750 users) or Set-Up Instructions for 
the Machine (for MF 5770 users).) 

•

make sure the <REMOTE RX> setting in the <RX SETTINGS> menu is enabled, if you 
want to start receiving a document from the telephone. (See <6. REMOTE RX> of “Menu 
Descriptions,” p. 8-5.)

■ When You Receive a Fax Call

The telephone will ring. Pick up the handset and if you hear a beep 

➞ press [Start] on the 

machine to receive the fax, or enter the two-digit ID code from the telephone 

➞ hang up 

the handset.

NOTE

If the offhook alarm starts beeping, make sure that the handset is resting properly on the 
handset cradle. The offhook alarm can be turned off. (See <4. OFFHOOK ALARM> of 
“Menu Descriptions,” on p. 8-3.)

■ When You Receive a Voice Call

The telephone will ring. Pick up the handset to answer the call. If the caller wants to send 
a document after talking to you, ask them to press the start key on their fax machine. 
When you hear a beep, press [Start] on the machine to receive the fax 

➞ hang up the 

handset.

NOTE

The telephone rings for every call, whether it is a fax call or a voice call. If you want the 
machine to receive faxes automatically after ringing for a specified number of rings, 
enable the <MAN/AUTO SWITCH> setting. You can also specify the number of rings 
before the machine receives faxes. (See <5. MAN/AUTO SWITCH> of “Menu 
Descriptions,” on p. 8-5.)