Canon C755 사용자 설명서

Chapter 13

Troubleshooting

Printing Problems

■ The Alarm light comes on and the MultiPASS beeps while printing.

The MultiPASS may have a paper jam.
• Clear the paper jam. (

• If the MultiPASS has no paper jam, unplug the unit and wait five seconds, then plug it

in again. If the problem is fixed, the Alarm light will turn off, the cartridge holder will
move to its home position on the right side of the unit, and the LCD will return to
standby mode. If the Alarm light remains lit, contact your local authorized Canon
dealer representative. 

■ Data from the PC is not printed.

The power cord may not be plugged in securely.
• Check that the power cord is plugged securely into the MultiPASS and into the wall

plugged in and turned on.

The printer cable may not be securely connected to the MultiPASS and PC.
• Check the printer cable connection. (

The printer cable may not be the correct type.
• Make sure you have the correct printer cable type. (

The MultiPASS may have been plugged in or the PC may have been turned on
when you connected the printer cable.
• Unplug the MultiPASS and turn off the PC. Plug the unit back in and turn the PC back

on again.

• If you are using a USB cable, make sure you connect it during software installation to

ensure proper operation. (

1

MultiPASS Suite User’s Guide)

The protective tape may not be removed from the BJ cartridge.
• Be sure to remove the protective tape from the BJ cartridge before you install it. 

The BJ cartridge or tanks may not be installed properly.
• Make sure the BJ cartridge and tanks are installed properly. (

The BJ cartridge print head may need cleaning.
• Refer to the flow chart (

p. 12-8) and clean the BJ cartridge print head if necessary.

The BJ cartridge or tanks may need to be replaced.
• Determine if the problem is with the BJ cartridge or tanks (

necessary. (

For the following, 

1

MultiPASS Suite User’s Guide: