Canon C755 사용자 설명서
2-4
Setting Up
Chapter 2
Removing Shipping Materials
The MultiPASS has been packed with protective material to protect it during shipping.
Remove this material as follows and keep it in case you need to transport the unit in
the future:
Remove this material as follows and keep it in case you need to transport the unit in
the future:
n
The actual shipping materials may differ in shape, quantity, and position from the ones
shown above.
shown above.
1
Remove all
shipping tapes
from the
MultiPASS.
shipping tapes
from the
MultiPASS.
2
Remove the
protective piece
from the multi-
purpose tray.
protective piece
from the multi-
purpose tray.
3
Open the document tray, then
remove the shipping tape
and protective sheets.
remove the shipping tape
and protective sheets.
4
Open the operation panel
partially by gently pulling it
toward you.
partially by gently pulling it
toward you.
• It only opens slightly.
Then remove the protective
sheet from the ADF.
Close the operation panel by
pressing it down from the
center until it locks into place.
sheet from the ADF.
Close the operation panel by
pressing it down from the
center until it locks into place.
5
Open the printer cover, then remove
the protective piece and shipping
tapes from the cartridge holder.
the protective piece and shipping
tapes from the cartridge holder.