Canon C755 사용자 설명서
Chapter 2
Setting Up
2-19
Setting Up
Loading Paper in the Multi-Purpose Tray
Load paper in the multi-purpose tray as follows:
1
Make sure the paper thickness lever is
set to
set to
p
(up).
2
Raise the paper rest until stops
q
,
then move the paper guide to the left
to match the size of your paper
to match the size of your paper
w
.
3
Prepare a stack of paper by fanning
the edge that will feed into the unit
first, and then tapping the stack on a
flat surface to even its edges.
the edge that will feed into the unit
first, and then tapping the stack on a
flat surface to even its edges.
4
Insert the stack into the multi-purpose
tray until it stops
tray until it stops
q
, so that the right
edge of the stack is aligned with the
right side of the multi-purpose tray.
Slide the paper guide snugly against
the left edge of the stack
right side of the multi-purpose tray.
Slide the paper guide snugly against
the left edge of the stack
w
.
• The multi-purpose tray holds up to 100
sheets of 20 lb. (75 g/m
2
) plain paper.
• Make sure the stack is below the paper limit
mark (
P
).
The MultiPASS is now ready to print.
2
1
PAPER LIMIT MARK
2
1