Canon C755 사용자 설명서

Chapter 5

Paper Handling

Using Canon Specialty Print Media

This section provides guidelines for printing on Canon specialty print media and
describes special procedures required for high resolution paper and banner paper.

Specialty Print Media Guidelines

n

Be sure to read any instructions that come with your Canon specialty print media, as these
provide important information on how to achieve the highest print quality.

Follow these guidelines:

• When feeding transparencies or back print film, remove each sheet after it is

delivered, being careful not to touch the document tray. Do not allow film sheets to
stack up in the output tray. (Should you dirty the document tray when removing the
sheets, wipe the document tray clean with a clean, soft, lint-free cloth moistened with
water or diluted dishwashing detergent solution.)

• Let the printed sheets of film or paper dry completely before storing them.

Drying time:
– Canon High Gloss Photo Film, Canon Glossy Photo Paper, Canon Glossy Photo

Cards: 2 minutes

– Canon Transparencies, Canon Back Print Film: 15 minutes

• When your output has dried completely, cover its printed side with a sheet of plain

(not coated) paper before storing it. This is recommended even if you place the
sheets of film in a clear file or plastic holder.

• When loading transparencies or back print film, insert one sheet of plain paper as the

last sheet in the stack.

• Do not leave film in the multi-purpose tray for long periods of time. Dust and dirt may

accumulate on the film resulting in spotty printing.

• To avoid smudging caused by fingerprints, use a pair of thin cloth gloves while loading

and handling film.

• To avoid fading, do not expose printed film to prolonged sunlight.

• Store all print media flat. Do not remove them from their protective packaging until

you are ready to use them.

• Store unused film at temperatures between 59° and 86°F (15° and 30°C). The relative

humidity should be between 10% and 70%.