Canon MP140 빠른 설정 가이드
39
Troubleshooting
The LEDs Cannot Be Seen At All
Cannot Install the MP Drivers
Cause
Action
The machine is not turned on.
You have not pressed the ON/OFF button.
The machine will power on and the LED will light when you connect the power
cord and press the ON/OFF button.
The machine will power on and the LED will light when you connect the power
cord and press the ON/OFF button.
The LED may be in the Power Saver
mode.
mode.
Press any button on the Operation Panel except for the ON/OFF button to
restore the display.
restore the display.
Cause
Action
Unable to proceed beyond the Printer
Connection screen.
Connection screen.
If you were unable to proceed beyond the Printer Connection screen, follow
the procedure below to reinstall the MP Drivers.
the procedure below to reinstall the MP Drivers.
(1) Click Cancel on the Printer Connection screen.
(2) Click Start Over on the Installation Failure screen.
(3) Click Back on the screen that appears next.
(4) Click Exit on the Welcome screen, then remove the CD-
(2) Click Start Over on the Installation Failure screen.
(3) Click Back on the screen that appears next.
(4) Click Exit on the Welcome screen, then remove the CD-
ROM.
(5) Turn the machine off.
(6) Restart your computer.
(7) Make sure you have no application software running,
(6) Restart your computer.
(7) Make sure you have no application software running,
including anti-virus software.
(8) Follow the procedure described in your setup sheet to
reinstall the MP Drivers.