Canon FS10 소프트웨어 가이드

Before Downloading Still Images



Be sure to install the Digital Video Software before you connect the 
camcorder to the computer.



Make sure the camcorder is being powered using the power adapter before 
connecting it to a computer. 



Connect the USB cable directly to one of the computer’s main USB ports. 
The interface may not function correctly if the camcorder is connected via a 
USB hub.



The connection may not operate correctly if you are using other USB 
devices, excluding USB mice or keyboards, at the same time. If this occurs, 
disconnect the other devices from the computer and try reconnecting the 
camcorder.



Do not connect two or more camcorders to the same computer via the USB 
interface. The connections may not operate correctly. 





Refer to your computer manual for the location of the computer’s USB ports. 



For details about changing settings on the camcorder and connecting the 
camcorder to the computer, see the camcorder’s instruction manual.

„ Settings on the camcorder

Before connecting the camcorder to the computer, change the following camcorder 
settings in advance.
• In the still images index screen, select which still images to play back (built-in 

memory or memory card).

• In the [SYSTEM SETUP] menu, set [USB SETTING] to one of the following options.

- [PC/PRINTER]:

To simply connect the camcorder to the computer without further operations.

- [CONNECT&SET]:

Select [PC/PRINTER] on the camcorder every time you connect it to a computer.

CO

PY