Canon vistura 사용자 가이드

Editing

The VISTURA’s Auto Editing Funciton
enables you to smoothly rerecord scenes
from an original tape in any order. You can
then view the entire finished product and
make all the fine adjustments you want
before the final recording. It is easy to
reorder, to make your videos perfect.

1. Connect the camera to the VCR.

• See the “Connection for playback on

a TV” instructions on page 21.

2. Turn the TV on.

• Be sure to set it to the video channel,

or set the TV/Video selector to Video.

The camcorder’s Auto Editing Function
controls your VCR by using the same
infra-red signals as the VCR’s remote
control.

Make sure the camera is in a spot where
it can remotely control your VCR.

Preparing for Editing

3. Turn on the VCR and load a blank cassette.

• See your VCR instruction manual.

4. Open the VCR menu and select aEDIT MODE.

• When you select the edit menu all the displayed informations are also

displayed on the screen of the TV connected your VCR. However, these
informations will not be recorded onto the tape in the VCR.

Setting the Camera to Control your VCR

1. Check where the remote control sensor is on your VCR using its

normal remote control.

2. Place the camera pointing directly at the sensor, not more 20 inches

(50cm) away.

• Check that the sensor will pick up signals easily from this spot using the

VCR’s normal remote control.

• Make sure that the cables and the camera strap do not obstruct the signals.

3. Make sure that the VCR is in record-pause mode.

4. Make sure that all the other video equipments are turned off to

avoid accidental recording.

Infra-red signals
transmitter