Canon MX300 사용자 설명서

Before Using the Machine

Turn on the machine before printing.

„

Before turning on the machine, confirm the following.
z

The FINE Cartridges are installed properly.

If you are using the machine connected to a computer, confirm also the following.
z

The machine is connected to your computer (or a compatible device).

z

The MP Drivers are installed.

Press the ON/OFF button to turn on the 
machine.

The Power lamp flashes and then remains lit 
green.

If you are using the machine connected to a 
computer, turn on your computer.

„

To turn off the machine, press the ON/OFF 
button.

When the Power lamp stops flashing, the machine 
is turned off.

If preparatory operations above are not complete, follow your setup sheet to complete them.

If the Alarm lamp lights up or flashes orange and an 

error message is displayed on the LCD, see “An Error 

Message Is Displayed on the LCD” on page 76.

About the Power Plug
When removing the power plug after turing off the 

machine, be sure to confirm that the Power lamp is 

not lit. If the power plug is removed from the wall outlet 

with the Power lamp still lit or flashing green, the 

machine may become unable to print.
See “Keeping the Best Printing Results” on page 70.

The power cannot be turned off while the machine is 

sending or receiving a fax, or when there are unsent 

faxes stored in the machine’s memory.