Canon MX300 사용자 설명서
45
Faxing
Receiving Faxes
Flow of Receiving Faxes
The operation flow of receiving faxes is as follows:
Step 1
Select a receive mode.
See “Selecting the Receive Mode” on page 45.
See “Selecting the Receive Mode” on page 45.
Step 2
Load A4, Letter, or Legal-sized paper.
See “Loading Paper” on page 12.
See “Loading Paper” on page 12.
Step 3
Confirm the paper settings and adjust them as needed.
See “Changing the Print Settings” on page 50.
See “Changing the Print Settings” on page 50.
Selecting the Receive Mode
Select the receive mode according to your needs.
z
z
When you have a dedicated telephone line for fax use only:
Select FAX ONLY MODE.
Select FAX ONLY MODE.
z
When you are using a single telephone line for faxes and voice calls:
If you receive mainly voice calls and sometimes faxes, select TEL PRIORITY MODE.
If you receive mainly faxes and sometimes voice calls, select FAX PRIORITY MODE.
If you receive mainly voice calls and sometimes faxes, select TEL PRIORITY MODE.
If you receive mainly faxes and sometimes voice calls, select FAX PRIORITY MODE.
z
When you subscribe to a ring pattern detection service provided by your telephone company.
(Not available depending on the country or region of purchase.):
Select DRPD or NETWORK SWITCH.
(Not available depending on the country or region of purchase.):
Select DRPD or NETWORK SWITCH.
Important
z
The machine cannot receive faxes when the power is turned off. Press the ON/OFF button to
turn the power on.
z
To cancel receiving, press the Stop/Reset button and follow any instructions on the LCD.
Note
If you do not have a dedicated phone line for fax use only, you need to connect a telephone or an
answering machine to the External device jack of this machine.