Canon MP990 설치 설명서
5
6
7
1
2
3
4
Select
Directly enter the access point name, then
press the
OK button.
If you are living in an apartment, nearby access points in use
may be detected.
•
Enter the access point name/network name (SSID)
using the Easy-Scroll Wheel, then press the
OK button.
For details on how to check the access point name/network
name (SSID), refer to the manual supplied with the access
point or contact its manufacturer.
•
Enter the same access point name/network name (SSID) as
that of the access point on the machine.
•
Enter upper and lower case letters of the alphabet correctly. Letters are case sensitive.
•
Go to either of the following steps according to the selected
security protocol.
•
Disable
WEP
WPA/WPA2
Select a security protocol for the access point, then
press the
OK button.
When
WEP 40 bit is selected in AirPort Utility (AirPort Admin Utility), select WEP (64 bit).
•
When
WEP (Transitional Security Network) is selected in AirPort Utility, select WEP (128
bit) or WPA2-PSK (AES).
•
Use the Easy-Scroll Wheel to select the character. Use the ]
button to move the cursor to the right.
Action
Reference Information
Select
Easy settings, then press the OK button.
Select
Yes, then press the OK button.
Select
Wireless LAN setup, then press the OK button.
Use the Easy-Scroll Wheel to select
Settings, then
press the
OK button.
Enter the access point name/network name (SSID) and security setting (WEP, WPA,
etc.) on the machine directly.
Follow the procedure below.
When wireless connection is enabled, the
Wi-Fi lamp lights
blue.
•
Entering the Access Point's Wireless LAN Settings Directly on the
Machine