Canon S750 빠른 설정 가이드
6
Basic Printing
Always follow the specific media instructions packaged with your media for
complete details and ink drying times.
complete details and ink drying times.
5.
Slide the paper guide to the edge of the media until firmly in place.
To load envelopes:
To load envelopes:
To load envelopes:
To load envelopes:
1.
Lift the cover and set the paper thickness lever to the envelope mark. Close
the cover.
the cover.
2.
Slide the paper guide to the left.
3.
Press down on the corners and
sides of the envelopes to make
them as flat as possible by
expelling all of the air.
sides of the envelopes to make
them as flat as possible by
expelling all of the air.
To avoid paper jams, make sure
envelopes are flat before you
load them into the paper tray.
envelopes are flat before you
load them into the paper tray.
Make sure that none of the flaps overlap. If the envelope edges
are not flat, crease them with the side of a pen.
are not flat, crease them with the side of a pen.
Do not allow more than 10 envelopes to stack on the paper rest
or output tray.
or output tray.
4.
With the address side facing up and pointed
in the direction shown in the illustration,
align the stack with the right side of the sheet
feeder, then insert the stack into the printer.
in the direction shown in the illustration,
align the stack with the right side of the sheet
feeder, then insert the stack into the printer.
5.
Slide the paper guide to the edge of the
envelopes until firmly in place.
envelopes until firmly in place.
6.
From the printer driver interface, select the
correct paper size (see “To manually adjust
print quality settings in Windows:” on page 10 or “To manually adjust print
quality settings in Mac OS:” on page 11).
correct paper size (see “To manually adjust
print quality settings in Windows:” on page 10 or “To manually adjust print
quality settings in Mac OS:” on page 11).
Flap side of envelope faces down