Canon S750 빠른 설정 가이드
Troubleshooting
39
Handling Error Messages
Handling Error Messages
Handling Error Messages
Handling Error Messages
Meaningless
characters
printed
(continued)
characters
printed
(continued)
ECP mode not set
Extended Capabilities (Parallel) Port, or ECP, provides faster data
transfer between the computer and the printer. If the ECP setting is
incorrect, it could result in incorrect print information going to the
printer. See the S750 User’s Guide on the Setup Software & User’s
Guide CD-ROM for instructions on how to check ECP settings and
reconfigure if needed.
transfer between the computer and the printer. If the ECP setting is
incorrect, it could result in incorrect print information going to the
printer. See the S750 User’s Guide on the Setup Software & User’s
Guide CD-ROM for instructions on how to check ECP settings and
reconfigure if needed.
Problem
Problem
Problem
Problem
Possible Cause
Possible Cause
Possible Cause
Possible Cause
Try This
Try This
Try This
Try This
Printer does
not print
not print
When a printer error occurs, the POWER/ERROR lamp flashes orange between green
flashes. Count the number of orange flashes to determine and resolve the problem:
flashes. Count the number of orange flashes to determine and resolve the problem:
Alternately
flashes green
and orange
(service error)
flashes green
and orange
(service error)
1. Remove the paper from the printer, switch the printer off, then
unplug it.
2. Reconnect the printer power and turn it back on.
If the same error message persists after restarting the printer, contact
the Customer Care Center.
the Customer Care Center.
2 orange flashes
(paper is out or
not feeding
correctly)
(paper is out or
not feeding
correctly)
If no paper is loaded in the paper rest, or if paper is not loaded
correctly, reload the paper correctly, then press the RESUME/CANCEL
correctly, reload the paper correctly, then press the RESUME/CANCEL
RESUME/CANCEL
RESUME/CANCEL
RESUME/CANCEL
button on the printer. See “Loading Plain Paper and Other Canon
Media” on page 4 for how to load different types of media.
Media” on page 4 for how to load different types of media.
3 orange flashes
(paper jam)
(paper jam)
See the troubleshooting topic “Paper jams in the printer” on page 35.
4 orange flashes
(empty ink tank)
(empty ink tank)
One of the ink tanks is empty. Replace it. See “Monitoring Ink Levels” on
page 19 and “Replacing Ink Tanks” on page 20 for more information.
page 19 and “Replacing Ink Tanks” on page 20 for more information.
6 orange flashes
(no printhead
installed)
(no printhead
installed)
Install the printhead. After installing the printhead, you may need to
realign it. See “Aligning the Printhead” on page 23.
realign it. See “Aligning the Printhead” on page 23.
7 orange flashes
(defective
printhead)
(defective
printhead)
Remove and reinstall the printhead. Ensure that the protective tape has
been removed. If re-installing the printhead does not resolve the
problem, contact the Customer Care Center to replace it with a new one.
been removed. If re-installing the printhead does not resolve the
problem, contact the Customer Care Center to replace it with a new one.
8 orange flashes
(waste tank
almost full)
(waste tank
almost full)
The printer has a built-in waste ink tank to hold the ink consumed
during printhead cleaning. Press the RESUME/CANCEL
during printhead cleaning. Press the RESUME/CANCEL
RESUME/CANCEL
RESUME/CANCEL
RESUME/CANCEL button to
restart printing, then contact the Customer Care Center to have the
waste ink tank replaced immediately.
waste ink tank replaced immediately.
Problem
Problem
Problem
Problem
Possible Cause
Possible Cause
Possible Cause
Possible Cause
Try This
Try This
Try This
Try This