Canon BJC-5100 사용자 설명서
Chapter 5
Troubleshooting
5-5
T
roubleshooting
An Error Message Appears
Printing does not start due to an error writing to LPT1
Cause
Solution
Printer is not on
Check the POWER/ERROR light
The
The
POWER/ERROR
light should be green. If the light is
flashing, the printer is warming up.
Parallel cable not
Check the parallel cable
connected correctly
Make sure the parallel cable is securely fastened to the
computer and the printer. See the Quick Start Guide for
details.
computer and the printer. See the Quick Start Guide for
details.
Parallel cable fault
Try to use another parallel cable
Make sure you are using an IEEE 1284 ECP-compatible
parallel interface cable.
Make sure you are using an IEEE 1284 ECP-compatible
parallel interface cable.
Another device is
Check the LPT1 port
connected to LPT1
Make sure the printer is connected to LPT1.
Switching device or
Check the switching device or external buffer
external buffer fault
Disconnect the switching device or external buffer and
print with the printer connected directly to the computer.
If you can then print normally, the fault is probably in the
switching device or external buffer. Consult the switching
device or external buffer supplier.
print with the printer connected directly to the computer.
If you can then print normally, the fault is probably in the
switching device or external buffer. Consult the switching
device or external buffer supplier.
Print spool is not
Change the spool setting
operating correctly
Open the printer Properties dialog box. Windows 98 or
Windows 95—On the Details tab, click Spool Settings and
then select “Print directly to the printer.” Windows NT
4.0—On the Scheduling tab, click on “Print directly to the
printer.”
Windows 95—On the Details tab, click Spool Settings and
then select “Print directly to the printer.” Windows NT
4.0—On the Scheduling tab, click on “Print directly to the
printer.”