Canon s520 빠른 설정 가이드
6
Basic Printing
Always follow the specific media instructions packaged with your media for
complete details and ink drying times.
complete details and ink drying times.
5.
Slide the paper guide to the edge of the media until firmly in place.
To load envelopes:
To load envelopes:
To load envelopes:
To load envelopes:
1.
Lift the cover and set the paper thickness lever to the envelope mark. Close
the cover.
the cover.
2.
Slide the paper guide to the left.
3.
Press down on the corners and sides
of the envelopes to make them as flat
as possible by expelling all of the air.
of the envelopes to make them as flat
as possible by expelling all of the air.
To avoid paper jams, make sure
envelopes are flat before you load
them into the paper tray.
envelopes are flat before you load
them into the paper tray.
Make sure that none of the flaps overlap. If the envelope edges
are not flat, crease them with the side of a pen.
are not flat, crease them with the side of a pen.
Do not allow more than 10 envelopes to stack on the paper rest
or output tray.
or output tray.
4.
With the address side facing up
and pointed in the direction
shown in the illustration, align the
stack with the right side of the
sheet feeder, then insert the stack
into the printer.
and pointed in the direction
shown in the illustration, align the
stack with the right side of the
sheet feeder, then insert the stack
into the printer.
5.
Slide the paper guide to the edge
of the envelopes until firmly in
place.
of the envelopes until firmly in
place.
6.
From the printer driver interface,
select the correct paper size (see “To manually adjust print quality settings in
Windows:” on page 10 or “To manually adjust print quality settings in Mac
OS:” on page 11).
select the correct paper size (see “To manually adjust print quality settings in
Windows:” on page 10 or “To manually adjust print quality settings in Mac
OS:” on page 11).
Flap side of envelope faces down
S520_QSG.book Page 6 Thursday, October 11, 2001 4:22 PM