Canon i80 빠른 설정 가이드

Advanced Printing

1

Set up the printer

Ensure that the universal AC adapter is connected securely.
If you do use a battery pack, ensure that it is fully charged.

2

Open the paper rest and turn on the printer.

3

Load the 4"×6" paper into the sheet feeder in the portrait position (short 
side facing down) and the print side facing up.

4

Connect the digital camera to the printer.

(1) Make sure the camera is turned off.

(2) Connect the camera to the printer using the USB cable (for connection to a 

computer) supplied with the camera.

(3) Set up the camera for direct printing.

When the connection between the camera and printer has been established, the 
Power lamp on the printer flashes once.

z When printing photos with the digital camera connected to the printer, 

it is advisable to use the AC adapter supplied with the camera. If you 
use the camera battery, be sure to charge it fully.

z Depending on the model or brand of your camera, you may have to 

select a mode of printing photos in compliance with “PictBridge” 
before connecting the camera.
You may also have to turn on the camera or select Play mode manually 
after connecting the camera to the printer.
Perform necessary operations according to the Instruction Manual 
supplied with your camera.

z When printing from your PC, be sure to unplug the cable connecting the 

digital camera.

The printer performs printing with its print speed decreased to improve 
its print quality as much as possible when the print head has not been 
aligned. The print speed may be increased if you connect the printer 
with the computer and perform the print head alignment.
See "A

Aligning the Print Head" on page 46.

US_i80_QSG.book  Page 18  Friday, October 10, 2003  3:25 PM