Canon i80 빠른 설정 가이드
Troubleshooting
65
Note
z Images can be printed directly from “PictBridge” or Canon “Bubble Jet
Direct” compatible digital cameras and digital video camcorders connected
to this printer.
to this printer.
z If the connected digital camera or digital video camcorder does not support
“PictBridge” or “Bubble Jet Direct”, the P
POWER lamp on the printer flashes
eleven times. If this happens, disconnect the connection cable and press
the R
the R
RESUME/CANCEL button.
z If the operation time or data transmission time is too long when the digital
camera or digital video camcorder is connected to this printer, a
communication time error may occur and no more images can be printed. If
this error occurs, press the R
communication time error may occur and no more images can be printed. If
this error occurs, press the R
RESUME/CANCEL button. It will automatically
turn on. If not, turn it on.
z A low ink warning is not displayed on the digital camera’s viewer.
z After replacing an ink tank, cancel the connection with the digital camera
z After replacing an ink tank, cancel the connection with the digital camera
and reset the ink counter by operating the computer.
See "R
See "R
Resetting the Ink Counter" on page 52.
If the ink counter is not reset, the remaining ink level may not be displayed
properly.
properly.
z For more details, also refer to the user's manual for the digital camera or
digital video camcorder.
If there is a problem with the digital camera or digital video camcorder,
contact the Customer Care Center.
If there is a problem with the digital camera or digital video camcorder,
contact the Customer Care Center.
US_i80_QSG.book Page 65 Friday, October 10, 2003 3:25 PM