Canon i900d 빠른 설정 가이드

Troubleshooting

Paper Does Not Feed Properly

Problem

Possible Cause

Try This

Cannot Print to
End of Job

Incorrect page size
selected

Ensure that the page size setting matches the size of the paper loaded in the
printer:
- Check the Paper Size setting from within your application to ensure that it

matches the size of the paper loaded.

- Check the Page Setup

Page Setup

Page Setup tab in the Printer Properties dialog box (for Windows) or

the Page Setup

Page Setup

Page Setup dialog box (for Macintosh) to ensure that it matches the size of

the paper loaded.

Not enough free
space on hard disk

Your operating system may be out of free disk space.
Check the available space on your computer’s hard disk.

Problem

Possible Cause

Try This

Paper Does Not
Feed Properly

Inappropriate paper
type used

Check to see if the paper you are printing on is too thick or curled.
See

"Print Media to Avoid

Print Media to Avoid

Print Media to Avoid"

on page 3.

Paper feed roller is
dirty

Follow the steps described below to clean the paper feed rollers.
If envelopes or post cards do not feed properly, even after correcting any paper
curl, clean the paper feed roller.
1. Ensure that the printer is turned on and there is no paper loaded in the printer.
2. Hold the Resume

Resume

Resume button down and release after the Power

Power

Power lamp flashes three

times.
The paper roller rotates as it cleans.
Repeat this cleaning operation three times.

3. Load a sheet of Letter plain paper in the printer.
4. Hold the Resume

Resume

Resume button down and release after the Power

Power

Power lamp flashes three

times, then feed the sheet of paper.
Repeat this operation three times.

If the printer still does not feed the envelopes or the post cards properly through
the printer, even after the cleaning operation, repeat the procedure.

Paper Jams

Paper Jams inside
the printer

1. Gently pull the jammed paper out of the sheet feeder slot or the paper output

slot, whichever is easier.

2. Close the front cover and reload the paper into the sheet feeder, then press the

Resume

Resume button on the printer.

Paper jams inside
the Photo Paper
Tray

Remove the paper according to the following procedure.
1. Remove the Photo Paper Tray.
2. Slowly pull the paper out if jagged paper remains in the sheet feeder slot.

3. If any of the paper is sticking out of the Photo Paper Tray, reload it in the tray.
4. Reload the paper into the Photo Paper Tray.
5. Press the Resume

Resume

Resume button.

If you cannot remove the paper or the paper tears inside the printer, or if the
paper jam error continues after removing the paper, contact the Customer Care
Center.

• If the paper tears and some of it is left in the printer, turn

the printer off, then open the front cover and remove the
piece of paper. Do not touch internal parts in the printer. If
you cannot reach or remove the torn paper, do not attempt
to disassemble the printer yourself. Contact the Customer
Care Center.

• If you cannot extract the paper, turn the printer off, and

then turn it back on. The remaining paper will be ejected
automatically.

• If you cannot pull the paper out, or if the paper tears and a

piece remains inside the printer, open the front cover and
remove it. Be careful not to touch the components inside
the printer.

• If you cannot pull the paper out, turn off the printer, and

then turn on the printer again. The paper will be
automatically ejected.