Canon i900d 빠른 설정 가이드

Troubleshooting

An Error Message Appears on the Screen

Problem

Possible Cause

Try This

Error Writing /
Output to USBxxx

Printer not ready

The Power

Power

Power lamp will flash green when the printer is warming up or when a print

job is being sent to the printer. It will glow a steady (non-flashing) green when it
is ready for use or when the print job is completed.

Paper not loaded

Load paper and press the Resume

Resume

Resume button.

Faulty connection

Ensure that the printer cable is securely connected to the computer.

Printer port error

Verify the printer port status.
Double-click Universal Serial Bus (USB) controllers

Universal Serial Bus (USB) controllers

Universal Serial Bus (USB) controllers on the Device Manager

Device Manager

dialog box, then double-click Canon

Canon

Canon i900D

i900D

i900D to see the status.

Refer to the User's Guide for instructions on how to verify the status.

Printer port
settings and printer
interface do not
match

Ensure that the destination Printer Port is set to USB PRNnn (Canon i900D) or
USBnn (Canon i900D) (Where nn represents a number).
If the settings are not correct, follow the procedures described in the

Easy Setup

Instructions

and reinstall the printer driver.

Refer to the

User’s Guide

for instructions on how to verify status and the correct

action to take.

Printer driver is not
installed properly

Uninstall then reinstall the printer driver.
1. Click Start

Start

Start, and select All Programs

All Programs

All Programs (or Programs

Programs

Programs), Canon

Canon

Canon i900D

i900D

i900D, and

Uninstall

Uninstall.

2. Follow the on-screen instructions to uninstall driver.

3. Follow the procedures described in the

Easy Setup Instructions

and reinstall

the printer driver.

“Error No.: X300”

Printer not ready

If the Power

Power

Power lamp is off, turn the printer on.

If the Power

Power

Power lamp is flashing green, the printer is initializing. Wait until the

Power

Power lamp stops flashing.

Printer not properly
connected

Ensure that the printer is securely connected to the computer.

Your printer name
is not displayed in
the Printer List

Printer List

Printer List of

Print Center

Print Center.

1. Select Applications

Applications

Applications from the Go

Go menu.

2. Double-click the Print Center

Print Center

Print Center icon in the Utilities

Utilities

Utilities folder.

3. Ensure that i900D

i900D

i900D is displayed in the Printer List

Printer List

Printer List.

If i900D

i900D

i900D is not displayed in the Printer List

Printer List

Printer List, reinstall the printer driver.

“Error No.: 2500”

Automatic print
head alignment
failed

Automatic print head alignment failed.
See

"Handling Error Messages

Handling Error Messages

Handling Error Messages"

on page 48.

Note

If you are using switching hub or other device, disconnect the
printer and reconnect it directly to the computer and try
printing again.
If successful, the problem may have been with the device.
There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.

Note

If you are using switching hub or other device, disconnect
the printer and reconnect it directly to the computer and try
printing again.
If successful, the problem may have been with the device.
There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.

Note

If the problem persists, delete all unnecessary documents
from the Extensions and Control Panels folder.