Canon i900d 사용자 가이드
44
Photo Paper Tray is lowered.
Turn the dial to use the sheet
feeder.
Turn the dial to use the sheet
feeder.
• When paper feeding is set to be done from the Photo Paper Tray, paper cannot be fed
from the Sheet Feeder.
Turn the knob on the Photo Paper Tray to change the way to feed paper.
Turn the knob on the Photo Paper Tray to change the way to feed paper.
• The size of paper loaded in the Photo Paper Tray may be different from the paper size
selected on your digital camera or the operation panel of the printer.
When printing from the digital camera, change the paper size setting of the digital
camera to the size of paper loaded in the Photo Paper Tray.
When using the digital camera that cannot select the paper size or when printing from
a memory card, change the setting on the operation panel of the printer.
When printing from the digital camera, change the paper size setting of the digital
camera to the size of paper loaded in the Photo Paper Tray.
When using the digital camera that cannot select the paper size or when printing from
a memory card, change the setting on the operation panel of the printer.
Error code
Turn off the printer, remove the power cord plug from the outlet, plug the power cord
back in, and then turn on the printer again.
If the same error persists, contact the Customer Care Center.
back in, and then turn on the printer again.
If the same error persists, contact the Customer Care Center.
Note
Adjusting the Print Head Manually
If the automatic print head adjustment does not work or if you wish to adjust
the print heads manually, follow the procedure below.
If the automatic print head adjustment does not work or if you wish to adjust
the print heads manually, follow the procedure below.
1. With the printer on, load a sheet of Letter plain paper in the printer.
2. Press the Menu
2. Press the Menu
Menu
Menu
Menu button.
3. Use the
buttons to select Maintenance
Maintenance
Maintenance
Maintenance and then press the OK
OK
OK
OK
button.
4. Use the
buttons to select Manual head align
Manual head align
Manual head align
Manual head align and then press the OK
OK
OK
OK
button.
If the Same Error Persists
If the same error persists after a countermeasure is taken according to the
above errors, turn off the printer, remove the power cord plug from the outlet,
plug the power cord back in, and then turn on the printer again.
If the same error persists after a countermeasure is taken according to the
above errors, turn off the printer, remove the power cord plug from the outlet,
plug the power cord back in, and then turn on the printer again.
Message
Try This
5. Use the
buttons to select Yes
Yes
Yes
Yes and then press the
OK
OK
OK
OK button.
6. The message "Did the pattern print properly?" is
displayed on the LCD.
Use the
Use the
buttons to select Yes
Yes
Yes
Yes and then press the
OK
OK
OK
OK button.
7. Examine the printed pattern and enter the number of
column "A" with fewest white stripes using the
buttons.
8. Press the OK
OK
OK
OK button.
9. Use the
button and move the cursor to column "B".
10.Repeat Steps (6) through (8) and enter the pattern
numbers up to column "G".
11.After entering the pattern numbers up to column "G",
press the OK
OK
OK
OK button.