LXE vx7 사용자 가이드
Install Mounting Brackets
43
E-EQ-VX7OGWW-H
VX7 User’s Guide
Procedure
Step 1 - Mount Bottom Mounting Bracket To Vehicle.
1.
Position the bracket to allow access to the switches and ports on the bottom of the VX7.
2.
Attach the bottom mounting bracket to the vehicle mounting surface using a minimum of
four 1/4 bolts (or equivalent) fasteners.
four 1/4 bolts (or equivalent) fasteners.
Note:
1/4 bolts and washers not included. It is recommended to use lock washers and
flat washers on the fasteners.
flat washers on the fasteners.
IMPORTANT:
Mount to the most rigid surface available.
Figure 32 Connect Bottom Bracket to Vehicle
After the bottom bracket has been attached to a rigid surface, you are ready to assemble the VX7
bracket configuration.
bracket configuration.
Mounting Dimensions
3
1
2
4
5
6
7
8
9
1. 14.40 in / 359.2 mm
2. 12.10 in / 307.3 mm
3. 6.05 in / 153.6 mm
4. 1.02 in / 25.9 mm
5. 3.38 in / 85.85 mm
6. Vehicle
Mount
Footprint
7. 0.406 in / 10.312 mm
8. 0.88 in / 22.3 mm
9. 1.25 in / 31.75 mm
Figure 33 VX7 Bracket - Mounting Dimensions (Not To Scale)