LXE vx7 사용자 가이드
86
Bluetooth Devices
VX7 User’s Guide
E-EQ-VX7OGWW-H
Bluetooth Devices
Assumption
: The System Administrator has Discovered and Paired targeted Bluetooth devices
for each VX7. The System Administrator has also enabled / disabled Bluetooth
settings and assigned a Computer Friendly Name for each VX7. See the VX7
Reference Guide for information and instruction on the VX7, Bluetooth control
panel applet and supported LXE Bluetooth printers and scanners.
settings and assigned a Computer Friendly Name for each VX7. See the VX7
Reference Guide for information and instruction on the VX7, Bluetooth control
panel applet and supported LXE Bluetooth printers and scanners.
The Bluetooth taskbar Icon state and Bluetooth scanner LED states change as Bluetooth devices
are discovered, pair, connect and disconnect. There may be audible or visual signals as paired
devices re-connect with the VX7. Only LXE printers or scanners are recognized and displayed in
the Bluetooth panel. All other Bluetooth devices are ignored. (see VX7 Reference Guide for
details).
are discovered, pair, connect and disconnect. There may be audible or visual signals as paired
devices re-connect with the VX7. Only LXE printers or scanners are recognized and displayed in
the Bluetooth panel. All other Bluetooth devices are ignored. (see VX7 Reference Guide for
details).
Taskbar
Icon
Legend
Bluetooth module is connected to one or more of the targeted Bluetooth
device(s).
device(s).
VX7 is not connected to any Bluetooth device.
VX7 is ready to connect with any Bluetooth device.
VX7 is out of range of all paired Bluetooth device(s). Connection is inactive.
Note:
When an active paired device, not the VX7, enters Suspend Mode, is turned Off or leaves
the VX7 Bluetooth scan range, the Bluetooth connection between the linked device and
the VX7 is lost. There may be audible or visual signals as paired devices disconnect from
the VX7.
the VX7 Bluetooth scan range, the Bluetooth connection between the linked device and
the VX7 is lost. There may be audible or visual signals as paired devices disconnect from
the VX7.
Notes
• The VX7 does not have a Bluetooth managed LED.
• The LED on the Bluetooth scanner illuminates during a scanning operation; there is
• The LED on the Bluetooth scanner illuminates during a scanning operation; there is
no Scan LED on the VX7.
• Barcode data captured by the Bluetooth scanner is manipulated by the settings in the
VX7 Scanner Properties control panel applet.
• Multiple beeps may be heard during a barcode scan using the Bluetooth scanner;
beeps from the Bluetooth scanner as the barcode data is accepted/rejected, and other
beeps from the VX7 during final barcode data manipulation.
beeps from the VX7 during final barcode data manipulation.
See Accessories for supported Bluetooth printers and scanners.
AppLock, if installed, does not stop the end-user from using Bluetooth, nor does it stop authorized
Bluetooth devices from pairing with the VX7 while AppLock is in control.
Bluetooth devices from pairing with the VX7 while AppLock is in control.