Canon n1000 네트워크 가이드
NetBIOS Network Settings (Windows Me/Windows 98/Windows 95)
2
4-2
Important
Procedures Required for a NetBIOS Network
Here is a summary of the procedures required to set the printer for use on a
NetBIOS network.
NetBIOS network.
z This printer is not compatible with NetBIOS over TCP/IP (NetBT). If you are
using TCP/IP in the network environment, use the TCP/IP protocol to print.
(Æ Chapter 2 “TCP/IP Network Settings (Windows)” )
(Æ Chapter 2 “TCP/IP Network Settings (Windows)” )
1
Install the network interface board and connect the
network cable.
Æ
Setup Guide
Follow the instructions in the Setup Guide to install the network interface board and connect the
network cable. The standard network-compatible printer does not require installation of the
network interface board; only the network interface cable must be connected.
network cable. The standard network-compatible printer does not require installation of the
network interface board; only the network interface cable must be connected.
2
Perform the settings on every computer in the network to be used for printing.
00_J80xNG_Eng.book Page 2 Thursday, April 11, 2002 7:20 PM