Canon n1000 사용자 가이드
Switching the Printer On and Off
7
1-7
Switching the Printer On and Off
Follow the procedure below to switch the printer on and off.
The examples below demonstrate normal operation of the printer after it is
set up and ready for normal operation. If the printer has not been set up
completely, follow the procedures in the Setup Guide to complete the setup
procedures before you execute the procedures below.
set up and ready for normal operation. If the printer has not been set up
completely, follow the procedures in the Setup Guide to complete the setup
procedures before you execute the procedures below.
Switching the Printer On
Switch on the printer before you execute a print job from the computer.
1
Press the Power button.
The Online lamp and Message lamp flash for a few seconds while the printer
warms up. After the printer has warmed up, the Online lamp lights and
remains on, and “Ready” is displayed.
warms up. After the printer has warmed up, the Online lamp lights and
remains on, and “Ready” is displayed.
The Message lamp flashes when a message is displayed. Read the message
and perform the required procedure.(ÆP.6-11)
and perform the required procedure.(ÆP.6-11)
If the display or Online lamp do not light, check the power cord connections
at the printer and the power supply and make sure that they are secure.
(ÆSetup Guide)
at the printer and the power supply and make sure that they are secure.
(ÆSetup Guide)
Set Media
Reset/Enter
Power
Online Message
Ink Replace
Online
Setup
Cancel Job/
Utility
Set Media
Reset/Enter
Power
Online Message
Ink Replace
Online
Setup
Cancel Job/
Utility
Ready
00_J80xUG_Eng.book Page 7 Friday, April 12, 2002 12:28 AM